Skip to main content

ZY-G2F-ISX031 Automotive Camera

Overview

The ZY-G2F-ISX031 Automotive Camera is an automotive-grade camera module featuring the Sony ISX031 sensor and a GMSL interface for high-speed, long-distance (maximum 33 meters with JoingAI serdes board/mec box) video transmission.

  1. General Description

The ZY-G2F-ISX031 is a high-definition automotive camera module designed for Advanced Driver-Assistance Systems (ADAS). It integrates the Sony ISX031 CMOS image sensor with an integrated ISP and the Maxim Integrated MAX96717 serializer, delivering high dynamic range (HDR) imaging over a robust LVDS coaxial interface.

  1. Key Features

• High Resolution: 1920 × 1536 (3MP) output @ 60fps/30fps.

• Superior Low Light: Built-in ISP with excellent Signal-to-Noise Ratio (48dB).

• Wide Temperature Range: Operates reliably from -40°C to +85°C.

• Rugged Design: IP69K rated for waterproof and dustproof performance.

• HDR Imaging: Excellent performance in high-contrast lighting environments.

• Compact Form Factor: 24mm × 24mm × 49.5mm.

  1. Ordering Information

3.1 Model Number

ItemSpecification
Model NumberZY-G2F-ISX031.H120
ManufacturerZhuying Intelligent Robot (Shenzhen) Co., Ltd.
ApplicationADAS (Forward/Rear/Surround View)

3.2 Model and Lens Specifications

ModelHFOVVFOVF.NoEFLWaterproof
ZY-G2F-ISX031.H120120.5° ± 5°92.5° ± 5°2.2 ± 5%3.0mm ± 5%IP69K
  1. Technical Specifications

4.1 Optical & Imaging Specifications

ParameterSpecificationNotes
Image SensorSony ISX0311/2.42-inch
ISPIntegratedBuilt-in Image Signal Processor
Lens ModelCD314-KNon-heater type
Aperture (F/No)2.2 ± 5%
Focal Length3.0mm ± 5%
Field of View (FOV)Horizontal: 120.5° ± 5°
Vertical: 92.5° ± 5°
@ 1920×1536 resolution
Lens Construction6G + 1IRAll Glass
Optical Offset±1°Active Alignment (AA) Process
Dynamic RangeHDR
SNR (Signal-to-Noise)48 dB
Output FormatYUV422
Output Pixels1920 (H) × 1536 (V)
Frame Rate60 fps Maximum
Startup Time< 600 ms

4.2 Electrical Characteristics

ParameterSpecificationNotes
SerializerMAX96717FMaxim Integrated
Transmission InterfaceLVDS-CoaxSingle-ended
Nominal Supply Voltage12V DC
Operating Voltage Range9V ~ 16V DC
Current Consumption≤ 800 mA @ 12V DC
Power-over-CoaxSupportedVia Pin 1

4.3 Environmental & Mechanical

ParameterSpecificationNotes
Operating Temp.-40°C ~ +85°C
Storage Temp.-40°C ~ +95°C
Ingress ProtectionIP69KWaterproof & Dustproof
Dimensions (LxWxH)24.0 × 24.0 × 49.5 mm
Weight< 50 g
Connector TypeFakra (Amphenol)Part No: fkmZ-spcf001-3gt30g-50
  1. Pin Definition (Module Connector)

The module utilizes a 2-pin Fakra connector for power and data transmission.

Pin No.NameTypeDescription
1PWR & SIGPower / OutputSingle-ended LVDS Signal (carries 12V DC Power)
2GNDGroundCommon ground for power and signal return
  1. Software & Configuration

• Architecture: ISX031 (Sensor + ISP) + MAX96717F (Serializer).

• Default Output Stream: 1920×1536@60fps, YUV422.

• Configuration: Configurable via I2C interface (details available under NDA).

  1. Mechanical Drawing & Exploded View

(Note: Diagrams are referenced from the original document but not reproduced here.)

Exploded View Bill of Materials (BOM):

Item No.DescriptionQty
1Fakra Connector1
2Screw (Type A)4
3Screw (Type B)4
4Rear Holder / Housing1
5PCBA Assembly2
6Screw (Type B)2
7Waterproof O-Ring / Gasket1
8Front Holder / Bezel1
9Lens Assembly1
  1. Revision History
Rev.DateDescriptionApproved
V012025-08-25Initial Release

Disclaimer: The information contained herein is subject to change without notice. Zhuying Intelligent Robot (Shenzhen) Co., Ltd. reserves the right to modify product specifications without prior notice.

Downloads

  • (Drivers and calibration files will be attached here.)