Quick Start

A first-time setup guide for JoingAI carrier boards, cameras, and accessories.

Before You Begin

• Verify all components are present in the package.
• Prepare a compatible NVIDIA Jetson module (Orin Nano / NX / AGX Orin) when applicable.
• Ensure the host system provides a stable 12V–24V DC power supply.

Setup Steps

1. Connect the Jetson module to the carrier board.
2. Attach cameras or accessories to the appropriate ports.
3. Power on the system and observe the status LEDs.
4. Install the necessary drivers and SDK (see Software > BSP).
5. Validate the installation by running the camera configuration tool (sudo fzcam_ui).

Need Help?

Refer to Troubleshooting or contact our support team through the official website.