Quick Start Guide
What's in the Box
Before you begin, verify that you have received:
- JoingAI carrier board or camera module
- Power supply or power cable
- Antenna (if applicable)
- Mounting hardware
Minimum Setup
- Mount the Jetson module onto the carrier board according to the mechanical drawing.
- Connect power using the recommended input voltage.
- Connect a display (HDMI/DP) and keyboard/mouse if using a desktop setup.
- Connect the camera or other peripherals.
- Power on and wait for the system to boot.
First Boot
After the system boots, log in and verify basic functionality:
uname -a
ls /dev/video*